I designed this draw to hold a lot of your BambuLab spare parts under or near to the printer. The main body of the draw can either be screwed or my preferred method is Glued with (Stick like sh*t) to the under side of the shelf. This prints in several sections and requires gluing. If you print it in ABS use poly cement to glue it together. If printed in PLA use super glue.
Bambu Studio Settings
File; bambu custom nozzle and accessories draw. (ALL DRAW FILES, INCLUDING INSERTS)
Bambu Studio Setting; 0.2mm standard layers, Top shell layers; 4, Bottom shell layers; 4, Sparse infill density; 25%, Sparse Infill Pattern; Gyroid, Enable Support; 30 degree, Remove small overhangs; OFF, Brim; Auto, Arrange all objects; Enable ‘Auto Rotate’
File(s); draw front plain. draw outer body.
Bambu Studio Setting; 0.2mm standard layers, Top shell layers; 4, Bottom shell layers; 4, Sparse infill density; 25%, Sparse Infill Pattern; Gyroid, Support; OFF, Brim; OFF, Arrange all objects; Enable ‘Auto Rotate’