Welcome your guests with their choice of multi-color champagne bottle shaped wine charms with 26 letters of the alphabet (plus blank version) neatly displayed on a stand.

A full plate with all letters and blank prints in under 2 hours on a Bambu X1C and uses less than 55 grams of filament. The holder and accompanying feet print in 3 pieces in about 3 hours. All parts are printed with the following settings.

Nozzle: 0.4

First Layer Height: .24 mm

Layer Height: .16 mm

Infill: 15%

Brim: None

Supports: None

The stand and two feet print in a little over 2 hours.

Pick and choose individual letters for your guests' names and offer multiple color combinations for duplicate letters. You can choose the color of the bottle glass, paper label and foil/letter. The glass bottle looks great in a dark silk PLA, the foil in a metallic PLA and the paper in a matte or regular PLA.

The 3MF file is already sliced for different colors at the correct levels for a plate of all letters as well as two additional plates if you want to clone letters onto them to print different color combinations. You can also do it yourself using the below layer heights:

Charms are about 74 mm tall. The ring at the top of the charm should print with a very small (but barely visible) gap between the ring and the bottle on the right side so you can put it on the stem of your glass and it will close back up to not fall off.