Please Use model FEIC20 with the 15% infill. This one is the most commonly used version. 
II included break-bolts for adding additional safety (so print multiple bolts :) 


c.kuijer

PLA-T_0001.jpg

PLA-T_0002.jpg

PLA-T_0003.jpg

PLA-T_0004.jpg

PLA-T_0005.jpg

PLA-T_0006.jpg

PLA-T_0002.webp

plate_1.png

0.2mm layer, 2 walls, 20% infill

V2.webp

plate_1.webp

FEI C20 JUMPING CUP for 25 mm Keyhole profile.Item is built in Bambu PLA-Tough with the standard profile 0.20 BLLX1C&nbsp;Bold will break when the impact is too high to ensure that the horse or pony doesn't damage itself.&nbsp;&nbsp;

0.2mm layer, 2 walls, 15% infill (no support needed)

Lepel voor het gebruik in the “key-hole”profielen conform FEI C20, materiaal in draft PLA-Strong, 20% vulling (rooster) met support, 0.4 mm nozzle, 0.2 default profile&nbsp;1H40 Full pront job incl prep.

FEIC10

Global

Print Profile(2)

Description

Comment & Rating (1)

License

Related Models