About two months ago, I bought new components for my computer. So I wondered what to do with the old ones who weren't completely useless yet.
I found this information: https://smallformfactor.net/forum/threads/completely-3d-printed-11l-m-atx-case.10332/
but only the skeleton was part of the download. So I've done the rest, I've been running this PC in a 3D printed case for over two months now, running on the Internet and watching a movie / light gaming.
components I used:
GA-B150M-D3H, i5-6600, 2x4GB DDR4, PSU Fortron SFX FSP350-50SAC - 350W, bulk and NVMe Apacer AS2280P4 256GB
I used some M3 screws and M3 nuts to mount the case.
I used super glue to attach the frame reinforcement
There is a possibility to print a transparent side or full. At the transparent, I assume a 2-3mm glass with dimensions of 170x220mm (I haven't tried it, the PC is currently running without a left side)
For the Power / HDD lights I used ordinary diodes, from an old PC, one spring (I have no idea the size, I found something in the press), the Power button is printed with Natural PLA, so the lights shine.
When using a graphics card (I use a built-in CPU) it is necessary to buy a PCIe riser, and of course to use a graphics card that will suit its dimensions

Currently not done:
- front USB ports
- front audio ports
- Covering the slot for expanded cards

You will find all STL files in the file archive, as well as a Fusion 360 file and a STEP file.

Used material: PLA Gembird Galaxy Blue, PLA GST3D Black Edition White


Printed on homemade MK3S, 0,3 layer

detail Power button:

https://youtu.be/Nv3aDcT0j0c
https://youtu.be/LskDAspXJ8Y

**********************************************

Asi dva mesice zpet jsem koupil do sveho pocitace nove komponenty. Tak jsem si rikal co se starymi, ktere jeste nebyly uplne k nicemu.
Nasel jsem tyto informace: https://smallformfactor.net/forum/threads/completely-3d-printed-11l-m-atx-case.10332/
soucasti souboru ke stazeni byl ale pouze skelet. Tak jsem si dodelal zbytek, aktualne jiz pres dva mesice tento PC ve 3D vytistene skrini provozuju na internet a sledovani filmu / lehky gaming.
komponenty, ktere jsem pouzil:
GA-B150M-D3H, i5-6600, 2x4GB DDR4, PSU Fortron SFX FSP350-50SAC - 350W, bulk and NVMe Apacer AS2280P4 256GB
K montazi case jsem pouzil nejake M3 srouby a M3 matice.
K pripevneni dilu na zpevneni ramu jsem pouzil super glue
K dispozici je moznost vytisteni pruhledne bocnice nebo plne. U pruhledne predpokladam sklo 2-3mm o rozmerech 170x220mm (nemam vyzkousene, pc aktualne provozuji bez leve bocnice)
Pro kontrolky Power/HDD jsem pouzil bezne diody, ze stareho PC, jednu pruzinku (rozmer netusim, nasel jsem neco v supliku), tlacitko Power je vytisteno s Natural PLA, takze kontrolky prosvitaji.
Pri pouziti graficke karty (ja pouzivam integrovanou v CPU) je potreba poridit PCIe riser, a samozrejme pouzit takovou grafickou kartu, ktera ktera bude vyhovovat svymi rozmery

Aktualne neni hotovo:
- predni USB porty
- predni audio porty
- zakrytovani slotu pro expanded karty

V archivu souboru naleznete vsechny STL soubory, dale je k dipozici Fusion 360 soubor a STEP soubor.

Pouzity material: PLA Gembird Galaxy Blue, PLA GST3D Black Edition White