Plate Holder For All Bambu Lab Printer Models Including A1 Mini
Copyright Claim
Plate Holder For All Bambu Lab Printer Models Including A1 Mini
Boost
22
40
8
Print Profile(4)
Plate Holder Thread Boards 0.2mm layer, 2 walls, 15% infill
Designer
3.6 h
1 plate
Plate Holder Original 0.2mm layer, 2 walls, 15% infill
Designer
2.3 h
1 plate
All Plate Holders, 3 plates to select from. 0.2mm layer, 2 walls, 15% infill
Designer
9 h
3 plates
Plate Holder Sturdy 0.2mm layer, 2 walls, 15% infill
Designer
3.1 h
1 plate
Boost
22
40
8
0
91
27
Released
Description
Plate Holder For All Bambu Lab Printer Models Including A1 Mini
Update 23 Oct 2023: I found that the large plate holder was too small in width so the plate would not slide in all the way so i have now updated that and fixed the problem.
3 Designs:
1: Simple original design uses least amount of material
2: Sturdy design
3: For @3dprinteracademy thread boards
If you have any suggestions for improvements please comment below and i will do my best to apply your suggestions
bambu
bambu a1
bambulab
x1c
p1p
p1s
x1e
a1 mini
a1
a1mini
plateholder
plate
plate holder
plate mount
plate organizer
thread board
thread
threadboard
build plate
build plate holder
build plate storage
plateholderforall
plateholderforallmodels
allprintermodels
a1miniplate
a1minicombo
p1splateholder
x1cplateholder
3dprinteraccessories
Comment & Rating (8)
All
Print Profile
Plate Holder Original 0.2mm layer, 2 walls, 15% infill
Easy print. Plates fit perfectly.
1
Reply
Print Profile
Plate Holder Sturdy 0.2mm layer, 2 walls, 15% infill
Printed great. No issues
1
Reply
Print Profile
All Plate Holders, 3 plates to select from. 0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
Plate Holder Thread Boards 0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
Plate Holder Original 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Plate Holder Thread Boards 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Plate Holder Thread Boards 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Plate Holder Thread Boards 0.2mm layer, 2 walls, 15% infill
(Edited)
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld