Rubber Gun / Rubber-band Pistol by uhltimate

uhltimate

Toys & Games>Other Toys & Games

Print Profile(7)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.12mm layer, 2 walls, 15% infill

Designer

5.1 h

3 plates

4.7(59)

Fast 2 Colors 1 Plate 1.5Hrs 0.2mm layer, 3 walls, 15% infill

1.3 h

1 plate

4.8(41)

1PLATE PLA/0.20mm

1.3 h

1 plate

4.8(34)

ASA, all parts on 2 plates

2.6 h

2 plates

4.6(16)

Click to see more

Boost

358

653

205

2.5 k

1.8 k

Released

Description

Introducing my 3D Printed Rubber Band Gun – the ultimate card shooter! Load up to 10 rubber bands and experience thrilling precision. Perfect for parties, game nights, and target practice. Get yours today and elevate your shooting game!

Info:

print the “wheel” with Support !
print the “spring” with 6 wall loops to make it strong to act as a spring. (Number of walls typically defaults at 2. Just set it to 6)

The other parts can be printed without using support.

Comment & Rating (205)

@user_3838949512

Print Profile

0.12mm layer, 2 walls, 15% infill

hat dierekt funktioniert.

@user_1124614637

Works fine, multiple parts made it very easy to print even with moist pet. Don't forget to melt and flatten both sides of the filaments with a lighter

(Edited)

@LoganV

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

this is so cool that I printed 5

@Poolshark314

Print Profile

0.12mm layer, 2 walls, 15% infill

turned out pretty well, nice prints

@user_3200568916

Perfekt

(Edited)

@uplake3D

Print Profile

0.12mm layer, 2 walls, 15% infill

Awesome and easy print.

@Purifier

Print Profile

0.12mm layer, 2 walls, 15% infill

super print ! c’est la guerre au bureau maintenant 🤣

@m00st.

Print Profile

0.12mm layer, 2 walls, 15% infill

Prints great and builds great also. Colored the logo and printed with two colors using the AMS. Did have my first print getting loose from the bed: had to apply glue to print the spring. Also tried Octagram Spiral as top surface pattern, which was a bad idea. May print the barrel again just to fix..

@christopher.wam

This model is outstanding! My daughter and I had a great time with the prints I made. A slight modification was needed for the trigger and wheel mechanism, as the standard 1.75mm PLA filament required some drilling to fit through the components. I'm currently learning Fusion 360 and aim to refine the design, which I'll share upon completion. Printer: Bambu X1C Build Plate: PEO

The designer has replied

@uhltimate

Thank you for your feedback and for sharing your experience with the model! I appreciate your engagement and creativity in modifying the trigger and wheel mechanism. Just to clarify, the curvature in the filament path was intentionally designed to provide a secure hold.