16" Laptop Stand with Tray and Cable Holder [ For 16 inch ] Remixed by Alexis_

Remixed by

Alexis_

Tools>Other Tools

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

Stand with Tray 16inch

Designer

16.5 h

3 plates

4.8(12)

ASA high quality (0.16mm layer, 2 walls, 15% infill)

32.4 h

4 plates

Boost

163

180

Released

Description

16" Laptop Stand with Tray and Cable Holder

Based on TVL 3D design. support 16 inches laptops.

dimensions : 355mm X 250mm X 14mm

tested with MagicBook X16.

Comment & Rating (20)

@JacobPratt

I had two failures while printing this on the left side only, but also in the exact same spot. Has anybody had this issue and would any have a suggestion for fixing it?

The designer has replied

@Alexis_

I have not had any problem of this type whether in PLA or PETG, can you try to reduce the speed or try another filament

@JacobPratt

I have actually tried multiple prints and printed other other things but this print tends to fail at the exact same spot.

@JacobPratt

Replying to @Alexis_ :

I was eventually able to get it printed, however it took reorienting the files and slicing it separate from the rest of the print. Also in the same place as the two previous failures I did get a layer shift. It's very strange but I'm glad I was finally able to get it printed. Just wanted to let you know just in case you're able to find something on the left side right what the supports begin seems to be where the issue was. If not an issue anymore all good. Thank you for the files either way.

@agerl68

Just perfect :) BIG thnx...

@user_2297863218

Thank you for your good design. Can it withstand carrying a 2.5kg laptop? My laptop gets quite hot. Will PETg become soft after being exposed to heat?

The designer has replied

@Alexis_

I can't tell you I printed it in PLA, maybe in ABS which resists heat better if that scares you

@user_2297863218

Replying to @Alexis_ :

I see. Thank you.

@JacobPratt

Print Profile

Stand with Tray 16inch

This profile had some issues in printing some of the pieces that were failing at the exact same place. I eventually deleted and reoriented the files and they eventually work. Not sure what the issue was.