Nice drawing of cat watching sunset - optimized to be 3D printed using 4 colors and to have short slice time.
Feel free to experiment with various filaments, but use recommended filaments to get optimal result.
Don't forget to upload results of your prints :)
Generated using Hueforge.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
PLA Aurapol Black Transmission Distance: 0.2
PLA Aurapol L-EGO Red Transmission Distance: 2
PLA Aurapol L-EGO Yellow Transmission Distance: 2
PLA Aurapol White Transmission Distance: 1.7
Start with Black
At layer #7 (0.64mm) swap to L-EGO Red
At layer #11 (0.96mm) swap to L-EGO Yellow
At layer #16 (1.36mm) swap to White for the rest.