Caldwell Conversion Uppercut V2 - By Aurathon

How to Assemble the prop can be found here: https://youtu.be/KZsm9oER1Co

V1 can be found here: https://cults3d.com/en/3d-model/game/caldwell-conversion-uppercut

Do also check out Moonlight Art Design Co on etsy for all you Hunt: Showdown prop/merch needs… and who knows… a wild Uppercut may appear there someday…

https://moonlightartdesignco.etsy.com

Dimension 448mm x 52mm x 172mm

Credits

Aurathon

Me, V2 is the result of over a years worth of improvements made to the V1 design. Many of the changes were based on feedback from you all and my own observations of V1 over the long term. 3D design remains as one of my favorite hobbies and will definitely be returning to the Hunt: Showdown universe at some point.

Shout out to:

DonStick3l - https://www.thingiverse.com/donstick3l/designs

Creator of the Fully Functional 1847 Colt Walker on Thingiverse, their design helped form the basis of the V2 and was a fun print. It helped me understand the inner workings of single action revolvers and largely informed the internal functions.

Blockster9 (Kieran Murray)

Kieran happily shared some of the OBJ files of their Caldwell Conversion Uppercut, serving as excellent reference and their renders meant I didn’t have to open the game If I wanted to cross check something in my design. Find them here:

https://www.artstation.com/blockster9

https://sketchfab.com/Blockster_9

https://sketchfab.com/3d-models/caldwell-conversion-uppercut-a7fceef1ddb4445caf29b9ebb455652c

DreamEndless

V2 has changed quite a bit and no longer uses Dreams design that modifies the Colt Walker 1848 to accept magnum rounds instead of being a breech loaded design. However, in the past they have released a remix of my V1 Uppercut that transforms it into a cap fire prop. I make no promises for V2, but for V1 alone he is definitely worth checking out.

https://www.thingiverse.com/dreamendless/designs

Printing

All stl files are orientated in what I believe provides the best mix between ease of printing and part strength. In prototyping parts, the Receiver and Base Pin support the majority of the props weight and are prone to breaking at a few key points, I therefore recommend printing these parts at 80-100% infill at least.

Other Requirements:

Sandpaper or chisel

Super Glue (Optional but recommended)

14 total Screws (if you decide to avoid the Pins)

Other Recommended Prints:

Hunt Showdown Terminus, DeSteiner Model 1887 - mechanically working Winchester prop gun
https://www.printables.com/model/30394-desteiner-model-1887-mechanically-working-winchest

Hunt Showdown Knife by MightyShrub:
https://www.thingiverse.com/thing:5191371

Hunt: Showdown Quad Derringer / Sharps Bulldog/ Sharps Pepperbox by AdamWiddow
https://www.thingiverse.com/thing:4209702

Hunt Showdown - Poison Bomb - Cosplay by AdamWiddow
https://www.thingiverse.com/thing:4666101

Hunt: Showdown, romero hatchet by Weerwolf
https://www.thingiverse.com/thing:5381335

Replica Russian M1895 Revolver by Awatkins1984 and Hunt: Showdown - silenced nagant by weerwolf
https://www.thingiverse.com/thing:3142916
https://www.thingiverse.com/thing:3845154

Hunt: Showdown Mosin Nagant Avtomat (Airsoft) by Weerwolf
https://www.thingiverse.com/thing:6130751/files

Hunt: Showdown Vintage Syringe by Troxx_ua
https://cults3d.com/en/3d-model/fashion/hunt-showdown-vintage-syringe

CAUTION: NOT A REAL GUN! It is not designed to function like a gun, do not use it like a gun. I'm not responsible for the dumb shit you do with this design.

Cura settings: Standard Quality

Fillament: PLA

Seed: 80mm/s

Resolution: 0.2

Supports: Yes

Brim/Rafts: Optional, but recommended for the Barrel and Stock

Retraction: Yes

Wall Ordering: Outside to Inside