This is a work in progress and does require a fair amount of faff post print to get it all working!

Mask and mouth is a tight fit was designed to use magnets but I ran out of time. I used small screws with loops I drilled into the inside of the mask to attach the ribbons.

Shoulder pads attached with Velcro tape.

The arm bands are printed flat then I heated them with a hair dryer and molded them around a big stick about the size of my arm.(e.g. in images)

The belt is printed in 2 parts for ease of printing just glue the connector on after.You may have to resize the attach point for the belt depending on how thick your belt is.

Print Settings

Printer Brand:

FlashForge

Printer:

Adventurer 3

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

.2

Infill:

20

Filament: 3D Filaprint, fiberology ABS X , easy PLA Bronze gold, Blue

Notes:

Mask was in ABS X(https://3dfilaprint.com/?s=ABS+X+Bronze+Gold&post_type=product)

Other parts printed in Easy PLA Blue (https://3dfilaprint.com/?s=easy+pla+blue&post_type=product)

Post-Printing

Sanded and painted with Replicoat (https://www.replicoat.co.uk/copy-2-of-services) before before priming and painting.

Category: Costume