Print Profile(1)
0.1mm layer, 2 walls, 25% infill
Designer
33 min
1 plate
Boost
19
29
12
0
73
58
Released
Description
This bookmark was designed as a gift for my wife. At 100% scale size, the overall size is slightly over 2 inches wide by 6 inches long. The bookmark height is 0.5mm with the panda head portion having a height of 1.0mm.
Print with 0.1mm layer height. Enable ironing if possible. Color change at layer 0.6mm.
Scale X/Y axis if bookmark is too large/small. Scale Z axis if bookmark is too thick/thin, however this bookmark is already thin and I do not recommend making it any thinner.
Check layer height of color change if changing thickness.
Comment & Rating (12)
All
Print Profile
0.1mm layer, 2 walls, 25% infill
The designer has replied
0
Reply
Thanks for sharing! I hope you like them.
0
Reply
Print Profile
0.1mm layer, 2 walls, 25% infill
Printed for my wife's book club to hand out to everyone :) ...big hit!
The designer has replied
0
Reply
Thanks! Glad to hear that everyone enjoyed them.
0
Reply
Print Profile
0.1mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.1mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.1mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.1mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.1mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.1mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.1mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.1mm layer, 2 walls, 25% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld