Bambu filament swatches 24x24x2mm. Print quick many of your own. 1AMS = 4colors 2 times on one plate Remixed by helipus

Remixed by

helipus

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

36min: 0.2mm layer, 2 walls, 100% infill (8 pieces)

Designer

42 min

1 plate

3.8(6)

25min 0.2mm layer, 2 walls, 100% infill (8 pieces)

Designer

31 min

1 plate

Boost

Released

Description

I wanted to be able to quickly print filament samples in Bambu sample style. This is my profile for this.
The samples are 24x24x2mm.
The lower half has a window which is only 1mm thick to the the transparancy of each filament.
The top most surface has ironing. So you can compare ironed and not ironed surface.
As I have one AMS so every build plate hold 2 swatches for every color in the AMS.
There are two print profiles:
1. Quality: Slow one trying to get the best results.
2. Quick: A fast print working for most of the filaments just fine.

Thanks to Zhanchi Wang from which I uses the basic swatch and remixed it.
I can also recommed his swatch holder which I'm using as well:
https://makerworld.com/de/models/89404#profileId-95687

Comment & Rating (8)

@bollekeil

Print Profile

36min: 0.2mm layer, 2 walls, 100% infill (8 pieces)

Prints Great. Thanks 👍

@ValeriaMomo

Print Profile

36min: 0.2mm layer, 2 walls, 100% infill (8 pieces)

perfect, but if you need to put the swatches on a "key ring" the hole is a little small

@cmpayne1985

Print Profile

36min: 0.2mm layer, 2 walls, 100% infill (8 pieces)

Other Issues

Strength Issue:doesn't print in a way to truly show dual or tri color filaments

The designer has replied

@helipus

You a right. These swatches are using optimized to use a minimun amount of filament. Therefore dual, tricolor or rainbow filaments are not shown perfectly. I still have 5 of theses swatches now and I'm fine with it. And don't see a ways to make this possible with this amount of filament. Do you?