Original Logo Scraper (modded) Remixed by 3D Byron

Remixed by

3D Byron

3D Printer>3D Printer Accessories

Print Profile(10)

All

P1S

P1P

X1 Carbon

X1E

Scraper.and.Grip.BBL.Logo.12x36

Designer

51 min

1 plate

4.9(22)

Holder.Logo.12x36

Designer

3.5 h

1 plate

5.0(9)

Scraper.and.Grip.noLogo.12x36

Designer

35 min

1 plate

5.0(8)

Scraper.and.Grip.onlyLogo.12x36

Designer

42 min

1 plate

5.0(5)

Click to see more

Boost

379

232

Released

Description

For the original blade that is included or can be reordered here (eu, adjust your region accordingly).
This handle has the original logo and lettering.
It can optionally be printed only the logo or without logo and lettering. I have provided you with the necessary print profiles.
In addition, the finger grip is slightly modified (rounded), so as not to damage / scratch the printer.
The holder has also received the logo, but can also be printed without. The print profiles I have also provided here with and without logo.
But that is not all. Optionally, you can use the original magnets (12x36) or use the additional print profiles with the addition ...2x12 (dimensions of the magnets, which can be obtained anywhere on the net or Hornbach.de.).
These magnets are very strong and nothing slips. I use these also with all my other Makes.
Have fun with it and don't forget:

Keep it simple!

Comment & Rating (57)

@jmendezfl

Print Profile

Scraper.and.Grip.BBL.Logo.12x36

Printed flawlessly without any changes.

The designer has replied

@3DByron

Thank you for your photo! Check the flushing volume when changing the filament. Then the first square of the logo will also be completely green. I often forget that too ;)

@jmendezfl

Replying to @3DByron :

Yeah, that was on me. I had it set to .80 and forgot to change it. But this been a functional print, the rest is perfect. Clean surface print and rigid. Thank you.

(Edited)

@andy1969

Print Profile

Scraper.and.Grip.noLogo.12x36

Just printed the scraper, no stand, no logo. Just the basics. Creality PETG. Does the job perfectly with the included hardware that came with my X1C. Thanks.

The designer has replied

@3DByron

Hey, thank you for your photos. <3 It's great that it works for you all without any problems.

@Biker40m

Print Profile

Scraper.and.Grip.onlyLogo.12x36

Beim ersten Druck (andere Vorlage) konnte die Klinge nicht richtig fixiert werden. Hier in Weiß, das Bauteil mit Support Filament gedruckt. Nach kleinen mechanischen Korrekturen ist der Schaber jetzt im Einsatz Bin auf die falsche Montage hingewiesen worden, mein Fehler. Wird gerade korrigiert. Danke dafür 👍.

(Edited)

@Mr_Grizzl

Print Profile

Scraper.and.Grip.onlyLogo.12x36

Top ans no Problems

The designer has replied

@3DByron

Thank you for your feedback

@mickey9409

Print Profile

Scraper.and.Grip.BBL.Logo.12x36

works great

@metus88

Print Profile

Scraper.and.Grip.BBL.Logo.12x36

I took the short version of the grip to print only that stl. However it was too higth to my scope. So I traslate vertical (z) -2mm in the plate and I sliced it. Perfect! Thanks for the 3d model.

@3DSpace

Print Profile

Scraper.and.Grip.BBL.Logo.12x36

Good print

@andrew.j.borell

Print Profile

Scraper.and.Grip.BBL.Logo.12x36

The designer has replied

@3DByron

glad you like the design and that the printing went smoothly

(Edited)

@andrew.j.borell

Replying to @3DByron :

it did go smooth. i printed a different version of this scraper first and the lettering was not as crisp. i want to say that could have been my fault but i didnt really do anything different, so im leaning towards this model having better orientation of the objects perhaps. very nice work.

(Edited)