A bit tight  on the ptfe tub, but worked great for my ender 3

n3bulus

0.2mm layer, 4 walls, 40% infill

Ślimak

cover

plate_1.webp

PXL_20240131_075656004_3ffd87db-5e5c-4b9b-a5d7-17625520e0c4.webp

plate_1.png

cliftoce

Voron PIF settings: 40% infill, 4 perimeters, 5 top/bottom layers.  4x clips is a good number to start with. Add more depending on your umbilical length. This print profile is for the 10mm clips size.

Cable clamp with voron logo, useful when using umbilical mod. Hole for ptfe 4mm, cable hole ~8mm and 10mm.

Print Profile(1)

Description

Comment & Rating (2)

License

Related Models

Mod Org

Voron V2.4 Rear umbilical (without endstop)

Sligthly overengineered desk clamp

Ethernet Cable Clips

Voron Cable Clamp Umbilical mod CANbus