Batman Animated / Justice League Unlimited Figure by chiz_m

chiz_m

Art>Sculptures

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

1/12 Scale (6in), 0.4mm nozzle, 0.12mm layer height

Designer

16.6 h

6 plates

4.7(45)

1/18 scale (4in), 0.2mm nozzle, 0.10mm layer height

Designer

23.9 h

6 plates

5.0(2)

MASK ONLY BETTER SUPPORTS - 0.12mm layer, 2 walls, 15% infill

52 min

1 plate

5.0(3)

No AMS version - 0.12mm layer, 2 walls, 15% infill

7.3 h

4 plates

Boost

707

986

1.1 k

1.2 k

Released

Description

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!

This a Batman figure modeled after Batman: The Animated Series with styling by Bruce Timm.

Watching Batman: The Animated Series (BTAS) and Justice League Unlimited animated shows, back in the day, I was introduced to Bruce Timm's minimalist, angular outlines and I loved his designs ever since. I thought that with this simplified contours, I don't need to know anatomy and would be able to draw/sculpt his characters. I collected reference materials and studied this particular style in hopes that one day I will be able to draw characters in this style.

Life happened and 30 years after, with the tools available today, I finally had the time and courage to learn digital sculpting. It was a dream come true being able to sculpt and 3D print Bruce Timm's version of Batman.

Throughout the sculpting process, I made sure the overall minimalist styling, angular contours and the face sculpt are accurate to the animated version but reduced some of the exaggerated proportions to improve it further. Hope you like it!

IMPORTANT

Please adhere to the license I set for this model. This model is NOT FOR COMMERCIAL USE. I have not given anyone permission to sell both digital or physical copies of this model.

PRINTING & ASSEMBLY INSTRUCTIONS

Select between the available scales:
1. 1/12 (6in. tall, minus the base) - ideal if you want a bigger model for display and do not have a 0.2mm nozzle
2. 1/18 (4in. tall, minus the base) - choose this scale if you want a smaller figure that could fit a small desk or display case (requires 0.2mm nozzle).
Print the parts as oriented in the profiles. Supports are required on some areas of the model. The profiles have all the supports set already.

The eyes go in as one piece. They go into the eye sockets from the inside but not all the way through. Use a tweezer to get the eyes in.
Use glue/adhesive to attach the parts.
BE CAREFUL removing the supports from the cowl as area especially the mask is thin and could detach along with the supports.

FILAMENTS USED

cowl, cape, boots: Polymaker Polyterra Charcoal Black
belt: Savannah Yellow
body: Matter Hackers Build PLA Silver
eyes: Inland PLA White
face: Inland PLA Pastel Pink

Comment & Rating (65)

@Anthony_R

Print Profile

1/12 Scale (6in), 0.4mm nozzle, 0.12mm layer height

The designer has replied

@chiz_m

I love it! Thanks for the rating and for posting your make! You seem to have even cleaner print than mine. Great job!

@Anthony_R

Replying to @chiz_m :

Absolutely youre welcome. I printed it in the new .12mm High Quality setting came out great very happy with the model!

(Edited)

@chiz_m

Replying to @Anthony_R :

Glad you like it!

@Crazyhonk

Print Profile

1/12 Scale (6in), 0.4mm nozzle, 0.12mm layer height

Head was a little bit difficult to print and to assemble

The designer has replied

@chiz_m

Looks great! Thanks for the feedback and the rating! Yeah, I agree the head is a little fiddly to assemble coz it has really small parts but it's still doable. Just needed some bit of patience. My prototype has the face mask split in half but it didn't look good so I settled with this version instead. I sacrificed for some assembly difficulties for better aesthetics.

(Edited)

@christophe.hebe

Print Profile

1/12 Scale (6in), 0.4mm nozzle, 0.12mm layer height

Beau modèle facile à imprimer, juste l'assemblage de la tête un peu compliqué mais très beau résultat au final. Impression avec du filament PLA jaune et gris de chez ELEGOO et noir carbone de chez SUNLU.

(Edited)

The designer has replied

@chiz_m

Aimer! Merci pour l'évaluation et pour le partage de votre impression !

(Edited)

@edm00se

Boosted

Print Profile

1/12 Scale (6in), 0.4mm nozzle, 0.12mm layer height

This was a great print with an excellent profile. I had to reprint the cowl due to the face mask portion breaking off with the supports, another profile here of just the cowl did the job for me. All in all it came out great though.

The designer has replied

@chiz_m

Looks great! Thanks for the rating and for sharing your print!

@SamanriS

Print Profile

1/12 Scale (6in), 0.4mm nozzle, 0.12mm layer height

amazing work, printed perfectly. make a wish for joker🙏🏻

(Edited)

@umtal0009

Cool, thank you!

@user_2622157572

Print Profile

1/12 Scale (6in), 0.4mm nozzle, 0.12mm layer height

easy print. great looking. I want to print it again at 200%.

@edm00se

Boosted

Print Profile

MASK ONLY BETTER SUPPORTS - 0.12mm layer, 2 walls, 15% infill

This was a much improved orientation for me. the only downside was that the PolyTerra PLA was a little marred by the supports. I used a Sharpie (black permanent marker) to color the two affected spots. Otherwise the front section came out fantastic, which was what had broken off from the original on my first run.

@LucaP1S

Print Profile

1/12 Scale (6in), 0.4mm nozzle, 0.12mm layer height

Very nice model. Long printing times but worth it

@Rivo1971

Print Profile

1/12 Scale (6in), 0.4mm nozzle, 0.12mm layer height

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.