R2D2 - HueForge 200x200
R2D2 - HueForge 200x200
Boost
11
22
5
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
5.6 h
1 plate
Boost
11
22
5
0
31
9
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA CF BambuLab Grey Transmission Distance: 1.3 “Attention”
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #4 (0.4mm) swap to Grey
At layer #10 (0.88mm) swap to Ash Gray
At layer #21 (1.76mm) swap to Ivory White for the rest.
Comment & Rating (5)
All
Print Profile
0.08mm layer, 2 walls, 100% infill
Great Job
1
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
Other Issues:PLA-CF too fragile for AMS
The designer has replied
1
Reply
for me it worked well
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
1
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld