Hueforge creation of a robot standing in rain in a flooded city street.
There are 3 size variations. You can see the different sizes by clicking on the “Download raw model files” button.
100x100mm
150x150mm
200x200mm
The version I printed in the picture is the 100x100mm
You will need four colors to print this
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Matte Bambu Black Transmission Distance: 0.3
PLA Geetech Dark Grey Transmission Distance: 2.5
PLA Matte Polymaker Light Grey Transmission Distance: 3
PLA Matte Bambu White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Gray
At layer #12 (1.04mm) swap to Light Gray
At layer #18 (1.52mm) swap to White for the rest.
Happy printing!