Rainbow Hearts Multicolor Animated Fidget Spinner by aPyroDesign

aPyroDesign

Toys & Games>Other Toys & Games

GIF

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 100% infill

Designer

3.9 h

6 plates

4.4(9)

0.16mm layer, 2 walls, 15% infill

46 min

1 plate

Boost

259

107

Released

Description

This Rainbow Hearts Multicolor Animated Fidget Spinner is designed to be printed as a multicolor print using the AMS, but can be printed using layer swaps or just as one solid color.

This fidget spinner is unlike a standard spinner. The shapes that are on the spinners are frames of animation. When you spin the spinner and view the spinner through a smartphone camera, the animations come to life. There are also two other ways to view the spinners. The instructions are below for the 3 different viewing methods.

Smartphone Camera Instructions: Click HERE

Strobe Light App Instructions: Click HERE

Handheld viewer: Click HERE

You will need an r188 bearing for the spinner.

Recommended bearings from Amazon: Click HERE

Files included:

3MF file that is ready for AMS printing.

Solid spinner File for filament swapping. (Optional)

Separate layers for multicolor printing (optional. If Needed)

Top and Bottom Cap files.

Bearing Top Cap. This part is to lock in the bearing.

Bearing top tool. This will make it easier to lock on the bearing top cap.

Interested in selling my spinners? Check out my Patreon for more info. Click HERE

Comment & Rating (10)

@CeerOne_SAK

Print Profile

0.2mm layer, 2 walls, 100% infill

l'ho stampato, l'ho testato. gira ma l'effetto ottico promesso nella gif nemmeno da lontano. per.la stampa con AMS se fosse stato inverso e liscio sarebbe stato più bello anche da tenere in mano. la tipologia di cuscinetto richiesto non è proprio un cuscinetto che si trova facilmente. almeno qui nella mi regione.

(Edited)

The designer has replied

@aPyroDesign

Devo dire che la tua valutazione mi ha un po' turbato. Questi spinner sono stati progettati per non essere visti solo con gli occhi. Nella descrizione ci sono pagine di istruzioni su come visualizzare correttamente gli spinner. Sono disponibile anche per domande. I cuscinetti che ho selezionato sono i migliori che ho trovato per questi tipi di spinner. Mi scuso se non sono facili da trovare dove vivi. Non sono sicuro di cosa fare al riguardo. Invece di valutare una stampa molto bassa, dovresti parlare un po' con l'autore per vedere se ha qualche suggerimento in futuro. English Translation: I have to say that your assessment troubled me a little. These spinners were designed not to be seen with just your eyes. In the description there are pages of instructions on how to correctly display the spinners. I am also available for questions. The bearings I selected are the best I have found for these types of spinners. I apologize if they are not easy to find where you live. I'm not sure what to do about it. Instead of rating a print very low you should talk to the creator a bit to see if they have any suggestions in the future. I have to say that your assessment troubled me a little. These spinners were designed not to be seen with just your eyes. In the description there are pages of instructions on how to correctly display the spinners. I am also available for questions. The bearings I selected are the best I have found for these types of spinners. I apologize if they are not easy to find where you live. I'm not sure what to do about it. Instead of rating a print very low you should talk to the creator a bit to see if they have any suggestions in the future.

@920flxers.

Print Profile

0.2mm layer, 2 walls, 100% infill

easy fun

(Edited)

@3D.Germany

Print Profile

0.2mm layer, 2 walls, 100% infill

epic

@dr.jsbennett

Print Profile

0.2mm layer, 2 walls, 100% infill

it came out good I just don’t now what the lock piece is for, and it’s kind of hard to spin it because its not one of the ones that you just fit the center piece in, but you have to screw it in and if you drop it it breaks and since you have to screw it in there’s a gap

@920FLXERS

Print Profile

0.2mm layer, 2 walls, 100% infill

easy to do and fun

@pauljeremy374

Print Profile

0.2mm layer, 2 walls, 100% infill

@JaxonJo.

Print Profile

0.2mm layer, 2 walls, 100% infill

@TKB3D

Print Profile

0.2mm layer, 2 walls, 100% infill

@Noobie3DPrintin

Print Profile

0.2mm layer, 2 walls, 100% infill

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Fidget Gyro Spinner

stevesDesigns

GIF

Micro Gyro Fidget Spinner

3D Print Bros

161

493

spider

MingGY

GIF

Liquid Wave Zoetrope Animated Spinner

aPyroDesign