I made a remix of the Bambu Lab P1P full printable enclosure mod
-you can put an acrylic or plexiglass pane in the door
-I created a frame with a hinge and installed it on my P1P
-the bolts from the original model are compatible with these hinges
-glue the frame parts to the pane and insert the door
-you need a pane with the dimensions 356x309x3
here is a shop (for europe)
https://www.plattenzuschnitt24.de/PLEXIGLAS-XT-3mm-klar.html
Print parts
part names | pieces |
door_left_top.3mf | 1 |
door_left_bottom.3mf | 1 |
door_right_top.3mf | 1 |
door_right_bottom.3mf | 1 |
door_middle_up_and_down.3mf | 2 |
DoorBolt .3mf | 2 |