P1S LED Air Vent Glass Riser by ENVY3D

ENVY3D

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 7% infill

Designer

12.6 h

2 plates

4.9(357)

Boost

591

976

523

2.4 k

2.5 k

Released

Description

P1S led glass air vent riser, sick of having to remove the top glass to print certain materials like PLA? well with this riser you can keep it on and also have the door closed and have 0 issues printing due to the vents releasing the heat, has a perfectly angled channel to run LED lights on to brighten the inside, also helps minimize the amount of dust getting inside the printer due to have the top glass off.

would love some feedback on this model as this is my first ever design and would like to know if I need to improve on anything, thank you!

Comment & Rating (523)

@2ndchance.org

Print Profile

0.2mm layer, 3 walls, 7% infill

a excellent job in your build now to find the led lights for it also doing another one in translucent blue did both on my P1S come out excellent thank you

(Edited)

The designer has replied

@ENVY3D

looks awesome! I will comment a link to the LEDs I used a bit later on, they plug into where the standard light is plugged in to

(Edited)

@tayglas

Replying to @ENVY3D :

Hey! Can you send that link to the lights that plug into the printer? I really want to print this and buy those lights. Thank you!

(Edited)

@Azzman67

Replying to @ENVY3D :

would love the link to the lights you used please - 3 hours left on the second plate and getting a tad excited to fit it it all up

(Edited)

@anthonydargay

Prefer this model more than others I sought out. Printed with Inland PLA+ True Red.

@schmoli

Print Profile

0.2mm layer, 3 walls, 7% infill

looks great and fits perfectly

The designer has replied

@ENVY3D

that came out mint in the black, thank you for your review 👌🏼

@schmoli

Bambu pla matte charcoal if interested!

@Spatialstudio

looks and fits perfect!! however there were some issues with my print. and settings I could adjust to reprint a clean one? 🙏🙏

@DuxRox76

I had the same issue :( I'm still going to print the left side to finish it off. I used plyers to clean up the loose filament.

@DuxRox76

testing with tree supports to see if that helps.

@CanadianGamer

This happened when I printed this file again recently for me as well. The first time I printed it, it was flawless (back in Jan). It appears that the print is trying to bridge in the wrong direction on that front cover side. The other side of mine was flawless

@miniaturehorde

this is great i just wish there was more info on the led lights i cant find any video's on installation of the lights is there a way of replacing the existing lights with a full ring around the top edge

The designer has replied

@ENVY3D

these are the ones I used, they run around the angled edge inside and also plug into were the led light bar currently is plugged into https://www.aliexpress.us/item/3256805766235306.html?spm=a2g0o.order_list.order_list_main.5.38bf1802JLaFWR&gatewayAdapt=glo2usa4itemAdapt

@user_16084803

Replying to @ENVY3D :

Do they interfere with the lidar since they replace the current light bar?

@ENVY3D

Replying to @user_16084803 :

to be honest, I have no idea as I don’t have a x1c, I don’t see why it would but then again, I don’t know anything about how the lidar works, maybe ask in the Facebook groups?

@aminoes

I've tried printing this twice with PLA+ on my P1S (.4mm nozzle) and the parts just dont fit. Normally I'd add a bit of hole compensation but I'm not sure what would work here, given the intricacies of the model.

The designer has replied

@ENVY3D

they are tight to get together for a good snug fit and no rattling, spray some wd40 or something a like and tap the top and should slot together

@aminoes

Replying to @ENVY3D :

I’m pretty sure it’s not that. I hammered them in after some sanding but the parts fractured from the impact. That’s half a spool down the drain 😭

@ENVY3D

yeah that’s really odd, what type of filament did you use? I haven’t had that issue with any of the ones I have printed nor that I have seen from anyone else besides it just being a bit tight, sorry that you have wasted half a roll

@javierm

Print Profile

0.2mm layer, 3 walls, 7% infill

Now with LED looking absolutely great. Thank you!

@Diablo09

Info on the Leds?

@javierm

Replying to @Diablo09 :

this is the one I bought. on the picture WaterProof LED Light Bar For Bambulab p1p/p1s https://a.aliexpress.com/_EGK7Jqp

(Edited)

@Diablo09

Replying to @javierm :

thanks .wish they would add link clicking the links from messages..lol

@edward.newbold

Excellent print. Went together perfectly. I used Bambu Gold Sparkle filament. Printed on my new P1S.

The designer has replied

@edward.newbold

Could you create a tool holder to somehow fit into the honeycomb holes along one side? Cheers!

(Edited)

@ENVY3D

Replying to @edward.newbold :

yeah that’s something I will be doing, that looks awesome in that colour

@CanadianGamer

Replying to @ENVY3D :

@ENVY3D Ive printed this twice, once in Jan (Flawless) once a couple weeks ago, and had the same issue. It was right after Bambu did the last update in studio.... I suspect they changed something in studio and its affecting the upload

@rach_eva

Print Profile

0.2mm layer, 3 walls, 7% infill

Very nice. It took a little bit of patience to get the pieces put together, but they definitely fit. Looks good in place, I’ll see how it works to provide ventilation going forward.

@Doge

Print Profile

0.2mm layer, 3 walls, 7% infill

Exactly what I was looking for, great aesthetic design and keeps the P1S mostly enclosed but allows for fantastic PLA/PLA+/PETG prints. LEDs also have a perfect surface for mounting with a great angle for lighting.