Lightsaber fridge magnet
Boost
123
179
6
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
2.9 h
2 plates
Boost
123
179
6
0
120
101
Released
Description
Lightsaber fridge magnet.
This is designed to print on 2 different plates, one plate for the hilt using the AMS to print the silzer and black. The second plate for the blade so this can be printed in glow in the dark filament (I used geetech blue whigh has worked out pretty well). Of course if you don't want to go with Glow in the dark just print the blade in a nice bright blue/green/red etc.
The blade is a tight push fit into the hilt and then a 4mm diameter magnet by 4mm deep is a tight fit in the end of the blade, no glue needed.
Comment & Rating (6)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
Worked as expected. Definitely a lot of purge for such a small object, but it turned out great.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld