Lámpara Casiopea
Es muy sencilla de imprimir sin unos parámetros especiales.
Lo único a tener en cuenta es que la parte frontal de la lámpara (la pantalla con la constelación) hay que imprimirla con un 100% de relleno.
En la parte de arriba de la lámpara he creado unos agujeros con la forma de la constelación para que se viera reflejada en el techo, pero debido a que la tira esta compuesta de múltiples leds no se aprecia ese efecto, aún así llena el techo de la habitación de estrellas creando un bonito efecto.
El montaje es muy sencillo ya que las diferentes partes entran a presión sin problemas siempre y cuando las tolerancias de vuestras impresoras este bien. He creado un pequeño carril para que la parte frontal encaje bien, teneis que apretar por los bordes hasta que encaje, aun así recomiendo usar un poco de pegamento en ese carril para asegurar que no se salga.
Puedes poner cualquier tira led RGB dentro, yo he usado esta de 1 metro
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Cassiopeia Lamp
It is very easy to print without special parameters.
The only thing to keep in mind is that the frontal part of the lamp (the screen with the constellation) must be printed with 100% infill.
At the top of the lamp I created some holes in the shape of the constellation so that it could be seen reflected on the ceiling, but because the strip is made up of multiple LEDs, that effect is not appreciated, it still fills the ceiling with the star room creating a beautiful effect.
Assembly is very simple since the different parts come under pressure without problems as long as the tolerances of your printers are correct. I have created a small rail so that the front part fits well, you have to press on the edges until it fits, I still recommend using a little glue on that rail to ensure that it does not come off.
You can put any RGB LED strip inside, I used this 1 meter one