Golf Blade Head Cover Wall Display by art.vandelay300

art.vandelay300

Household>Decor

Print Profile(1)

All

0.2mm layer, 2 walls, 15% infill

Designer

1.9 h

1 plate

Boost

Released

Description

I created this using Tinkercad. You can find the design here.

https://www.tinkercad.com/things/5iVoabVKLLi-blade-head-cover-wall-mount-1-and-4

Make sure the peg is printed with supports otherwise it will not fit snug to the bracket.

Printing this with PLA is just fine. Please let me know if you have any recomendations for changes.

This is a design to mount your blade putter head covers on the wall. Includes cover peg as well as wall bracket. Choose to print the single cover bracket or the four cover bracket. Both use the same cover peg. Copy and paste the cover peg as many times as you need to.

The cover peg is designed to mount perfectly straight and level. The peg is also designed to keep covers from twisting so they are always displayed on the wall perfectly straight.

I have tested this with Swag Golf magnetic covers. https://swaggolf.com

Comment & Rating (3)

@RainX1C

i have been looking for something like this for a long time!! this is awesome. Just printing some of these now. How do you mount this to the wall? Small nails? I may need to use drywall screws. so i am going to maybe need to drill the holes a little bigger.

The designer has replied

@art.vandelay300

I have started with small nails and went to thicker ones. I definitely need a solid solution instead of nails. The thicker the nail the better. I’ll try to get the exact measurements of the nails I have tried.

@art.vandelay300

I used medium sized picture nails but am quickly realizing I need something a bit better. perhaps I will adjust the design to make room for larger holes. How did the printing go?

No more