This is the remix of the Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm) from @fivesixzero.

This is a SLIM version - shorter printing time, less weight, slim design… but top quality stays untouched! :)

Remixed Things

I made few changes, notably:

• reduce the Z-axis length by 45 % (only 6 mm!)
• remove recesses on the bottom for threaded heat-set inserts
• change the design of the holes for attaching magnets to regular hole
• change the height of recesses on the bottom for M2-M5 nuts to follow reduced length of the tool
• few small visual tweaks in design (not important) …

Print instructions

• PLA/PETG (preferred)
• 0,15mm layer height (Prusa Mini/Mini+) - Quality settings
• 0,4mm nozzle type
• 4 perimeters
• enable generate support material for a printing bed - type “Snug”
• avoid crossing perimeters enabled
• 15% infill; type “Gyroid”
• seam position - type “Nearest”
• all others stock (Prusament settings, PrusaSlicer 2.5.0)

I have uploaded two types of files for printing:

A) one-color print - mark the labels with permanent marker (no water soluble)

B) two-color print - one color is for the body, the second color is for the labels

You can also download included .stl/.step/.3mf/.f3d files for easier remixing! Choose what you prefer.

If you like my work, please click to “Like” button. Thank you!