Ionic column display stand
Remixed by
Copyright Claim
Ionic column display stand
Remixed by
Boost
78
142
8
Print Profile(1)
0.12mm layer, 2 walls, 15% cubic infill
Designer
4.3 h
1 plate
Boost
78
142
8
0
163
56
Released
Description
Full attribution to RyanR https://www.printables.com/model/454543-ionic-column-pillar-display-stand-short-stubby-rem for this model - it was remixed from Piero Vermiglio's https://www.printables.com/model/296138-ionic-column-straight model. Please ignore the warning about non-manifold edges, it still prints perfectly as you see and causes no issues.
This is a 50% full version with the top about 100mm wide. Supports are needed for the overhangs. 15% infill is fine, I prefer cubic infill.
I printed this with BIQU matte grey PLA which shows excellent detail, especially at 0.12mm layer height.
Comment & Rating (8)
All
Print Profile
0.12mm layer, 2 walls, 15% cubic infill
nice model
1
Reply
Print Profile
0.12mm layer, 2 walls, 15% cubic infill
neat print! if you’re printing and have the ability to do separate materials for support I’d suggest it just for cleanliness sake. otherwise came out awesome with settings provided. thank you
1
Reply
Print Profile
0.12mm layer, 2 walls, 15% cubic infill
1
Reply
Print Profile
0.12mm layer, 2 walls, 15% cubic infill
1
Reply
Print Profile
0.12mm layer, 2 walls, 15% cubic infill
1
Reply
Print Profile
0.12mm layer, 2 walls, 15% cubic infill
1
Reply
Print Profile
0.12mm layer, 2 walls, 15% cubic infill
Support Issue
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% cubic infill
Strength Issue:didn’t hold its own weight
0
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld