Summary

I wanted a 3D printed rose that had the following, Quick to print, Had everything (Stem, Leaves, Sepals), And connected securely together (with a bit of super glue).

So after doing a bit of modifications to other designs and then putting it altogether, this is what I have.

Many thanks to the original designers! Please see remix section for the designs I modified.

Vase in pictures is from "SPIRAL vase" by YSoft_be3D

Notes:

I only used a brim for the "leaf".

I used 0.010" clearance for the "Stem" to "Sepals" connection. This allows for a nice snug connection when I printed it with my printer and settings. Depending on you printer and settings this may also work for you, or not. If not, scale the "Stem" or "Sepals" or both to get the fit you want.

Post-Printing

If printing in PLA, simply run Sepals under hot tap water and bend to desired position. You can also use this method to put a slight bend in the stem for a more natural look.

If printing with other material, you may need to use a lighter or other heat source to bend the desired material.

Simply glue all parts together.

Thanks for looking!

How I Designed This

I used Onshape to Draw up the "Stem" and "Sepals". The file is public and can be seen and modified by anyone with a free Onshape account. Access at this link. https://cad.onshape.com/documents/b4e618e89cb64a652dfbf729/w/8a49978650df175e4575aee3/e/488dba6728c7ef2225bc83f1

I did not modified the "Flower" at all. It is taken from "Stem and thorns (for anniversary rose) by MikeNeame"

Using Slic3r Prusa Edition, I scaled and cut the "leaves" from "Long Stem for "Rose with stem" by greenogre" to work with my remix design!