Custom Name Christmas Ornaments! Add any Name in Bambu Studio!
Custom Name Christmas Ornaments! Add any Name in Bambu Studio!
Boost
71
116
21
Print Profile(2)
0.2mm layer, 2 walls, all bottom layers!
Designer
6.5 h
2 plates
![1 Item --> 1 plate, [Tested], Gyroid, 0.16mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US5c2cd8d2494ea7/design/2023-11-19_f621f784e77f9.jpg?image_process=resize,w_100/format,webp)
1 Item --> 1 plate, [Tested], Gyroid, 0.16mm layer, 2 walls, 10% infill
8.8 h
13 plates
Boost
71
116
21
0
389
464
Released
Description
Add any name to these custom Christmas Ornaments right from inside Bambu Studio!
A single color change produces a beautiful effect!
Or no color change for ease of printing!
See the assembly guide for how to customize entirely from within Bambu studio!
Documentation (1)
Assembly Guide (1)
Custom Ornament bambustudio guide.pdf
Comment & Rating (21)
All
Print Profile
0.2mm layer, 2 walls, all bottom layers!
Profile works well. Though remember to recalculate the flushing values when changing colors to avoid color bleed.
1
Reply
Print Profile
0.2mm layer, 2 walls, all bottom layers!
worked great and I love that I could edit it in Bambu slicer
1
Reply
5 sind schon verteilt. Mit 105% Skalierung ging der Farbwechsel. Vorher hatte es teils auch einer Ebene gemischt drücken wollen. Werden super Nikolaus Überraschungen 😃
1
Reply
I have a question on this for the pet ornament. I'm really struggling to get it right and the only way I could get it to display like in the photo, was to split to objects and adjust its position. But I keep getting the warning that says "text_shape is too close to others; there may be collisions when printing." I also kinda wanted to do two separate colors for the paw and the name. I'm fairly new to printing. Does anyone have any suggestions?
0
Reply
Brillaint. Thanks for these Cassie, made some for the kids and fur babies last night :)
The designer has replied
1
Reply
Thank you! Glad you are enjoying :)
0
Reply
Print Profile
1 Item --> 1 plate, [Tested], Gyroid, 0.16mm layer, 2 walls, 10% infill
Took a little bit to figure out the text but once I did it was super easy!
The designer has replied
0
Reply
It is! Thank you for the vote!
0
Reply
Print Profile
1 Item --> 1 plate, [Tested], Gyroid, 0.16mm layer, 2 walls, 10% infill
The designer has replied
0
Reply
Thank you!
(Edited)1
Reply
Print Profile
1 Item --> 1 plate, [Tested], Gyroid, 0.16mm layer, 2 walls, 10% infill
The designer has replied
0
Reply
Thank you!
0
Reply
Print Profile
1 Item --> 1 plate, [Tested], Gyroid, 0.16mm layer, 2 walls, 10% infill
The designer has replied
0
Reply
Thank you!
0
Reply
Print Profile
1 Item --> 1 plate, [Tested], Gyroid, 0.16mm layer, 2 walls, 10% infill
The designer has replied
0
Reply
Thank you!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Share Alike
© 2024 MakerWorld