Storage Storage Box Remixed by JP Creations

Remixed by

JP Creations

Household>Office

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.9 h

1 plate

4.9(88)

0.2mm layer, 4 walls, 15% infill

2.5 h

1 plate

5.0(1)

Boost

170

329

158

737

593

Released

Description

I made this storage storage box so it can hold some of the most used storage devices around the house.

For assembly you need 6x m2x16mm screws. But you can also use a piece of fillament and melt the edges with a piece of metal that you heat with a lighter.

Fillament: Any

Supports: No

Brim: Yes on the clips is adviced

i used bambu PLA for the print but you can use everything your heart desires

Comment & Rating (158)

@Natirxstudio

我用PETG打印的，2层墙，15%填充。总体上是满意的，建议小连接部分不要开启熨烫否则容易分层（如图5所示）。使用的螺丝是M1.7，M2装不进去，如果直接设计成卡环不需要螺丝的话，效果我觉得会更好。

The designer has replied

@JPCreations

Thankyou for your make!

@user_1217742440

Love it, turned out awesome.

The designer has replied

@JPCreations

thank you for your make! looks awsome!

@Bobberclub

Print Profile

0.2mm layer, 2 walls, 15% infill

alles super

The designer has replied

@JPCreations

thank you!

@mawittenauer

Love this print! Thank you for sharing!

The designer has replied

@JPCreations

Thank you for your make!

@gerry_thorn

Print Profile

0.2mm layer, 2 walls, 15% infill

Very nice print. Just what I needed to store SD cards and a USB card reader.

(Edited)

The designer has replied

@JPCreations

thank you!

@user_926483363

Printing was problem-free, but the first hinge broke when screwing it in. Glued with superglue and then drilled with a 2mm drill. So it was fine, but I'm currently printing a wider box to accommodate my USB-SD card adapter.

The designer has replied

@JPCreations

thank you for your make! im currently fixing the hole size of the hinges. i was thinking about making a bigger box for sd card adapter. but there are so many variants. but i might make one aswell😁