A1 Mini Window Button - Umbrella Corporation Logo
Copyright Claim
A1 Mini Window Button - Umbrella Corporation Logo
Boost
18
31
6
GIF
Print Profile(1)
0.12mm layer, 2 walls, 15% infill
Designer
32 min
1 plate
Boost
18
31
6
0
40
20
Released
Description
Umbrella Corporation Logo A1 Mini Window Button
My other A1 Mini Window Buttons
Note:
I pulled inspiration from @moose_ and @thrutherframe designs but this was completely designed by me in fusion 360
This also replaces my previous design which may or may not allow for the cover to be used
Comment & Rating (6)
All
Doesn't fit very will but does seem to work. I printed everything default settings, I have A1 with AMS, printed in muti color.
(Edited)The designer has replied
0
Reply
Thanks for the feedback, I tested on mine and it wasn't super tight but not too loose either, if you let me know which yours is I can adjust and add an alternate version.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
logo ben definito, per appassionati della saga è una bella decorazione
The designer has replied
0
Reply
Grazie per la valutazione, sono felice che ti piaccia.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
Other Issues:Looks very cool, but the pin hole in the back is the wrong size, and doesn’t stay on the extruder.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld