Berd Air cooling for Duet3D Smart Effector - Bracket
Berd Air cooling for Duet3D Smart Effector - Bracket
Print Profile(1)
Description
This bracket is intended to be used with Haydn magball on the Duet3D smart Effector.
It have been tested on the Flsun SuperRacer and on the Anycubic Predator.
2 Arms with different angles have been designed:
- https://makerworld.com/en/models/55971#profileId-57492
- https://makerworld.com/en/models/55967#profileId-57489
It also requires to use this part:
https://makerworld.com/en/models/55982#profileId-57533
Depending on the length of the hotend used, the length can be adjusted directly on the slicer.
Hardware used:
- 12x 6mm M3 screws
- 6mm - 3/32 inches outer diameter brass pipe (https://www.amazon.ca/gp/product/B000BQO57M)
- an additional 3x 6mm M3 screws might be needed to secure the pipes
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
