12 Hole Ocarina Remixed by Duckbang

Remixed by

Duckbang

Hobby & DIY>Music

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

UPDATED 100% with improved supports

Designer

3 h

1 plate

4.5(32)

0.2mm layer, 2 walls, 100% infill

Designer

2.8 h

1 plate

3.8(18)

0.2mm layer, 2 walls, 8% infill

Designer

1.3 h

1 plate

3.4(17)

0.16mm layer, 3 walls, 5% infill

2.5 h

1 plate

4.9(20)

Click to see more

Boost

123

245

107

682

649

Released

Description

Just imagine your Zelda with “The Ocarina of Time”…..

(Just play it in a seculded place!)

Comment & Rating (107)

@bust4rhymes

Is it normal that support is building inside this section?

The designer has replied

@Duckbang

Hi, No. There should only be i slight bit in the mouthpiece that can easiliy be roved. try clicking 'support critical regions only'

@SteveY

Replying to @Duckbang :

Mate, I've got the same issue; there is support tree growing inside. The profile is the "updated 100% with improved support" one. I reckon painted supports - and not tree supports - would be the way to go.

@Duckbang

Replying to @SteveY :

@SteveY Thanks... I thought i painted supports outside on the revised model but must have still them automatically on for the inside... Ill see if i can delete the old profiles and get a new one up..

@male07tm

Print Profile

0.16mm layer, 3 walls, 5% infill

Very easy to print and functions great!

@cosmo.daba

Print Profile

0.16mm layer, 3 walls, 5% infill

Very nice!

@bust4rhymes

Print Profile

UPDATED 100% with improved supports

It printed correctly, i should have placed the seems somewhere else to improve the looks. Support blocker should be added where you blow because its a pain to remove. Other than that it does sound but that's clearly not a musical instrument. Sadly It only serve has a toy to anoy peoples cause what ever the holes you block the sound it always the same. It more like a whistle for sports... I really wanted it to work and try myself at ocarina but my dreams are gone. :(

@Steve_D

This printed great for me and sounds just like I expected it to! I've got a whole bed of these things printed now for a get together and I can't wait to hand them out to all the kids! I had to modify the file (see below), because the supports that showed up were clearly not sufficient, though I think that's bugged. The support painting on the downloaded files just doesn't work for me. I can see it, but it doesn't do anything. Here's what worked for me (X1C/aftermarket PEO plate). Bambu PLA basic, 220C extruder, 55C bed w/high temp plate preset. Supports on build plate only Support critical regions only Threshold angle 60* Normal (auto) w/ snug support Rectilinear support base pattern (makes supports much stiffer, easier to snap off without crumbling) 60% adaptive cubic infill

@Emanuelsleanza

Print Profile

0.2mm layer, 2 walls, 8% infill

stampa interrotta per spaghetti

@SumoSumo

Print Profile

UPDATED 100% with improved supports

like the design. easy and fast print

@user_4003751050

Print Profile

UPDATED 100% with improved supports

Good print ! just the bottom part wich is not perfect x1c, Pei plate,PLA matte Bambu

@Megalous

looks great! I used the updated profile but I can't get it to playnI suspect something is stuck in the mouth piece. it's hard to see though since I printed in black