Over engineered door lock
Copyright Claim
Over engineered door lock
Boost
42
77
4
Print Profile(0)
No Print Profile yet. Add one to earn points.
+ Add Print Profile
Boost
42
77
4
1
33
0
Released
Description
BOM:
- M3x22 - 5pcs - gearbox
- M3x10 - 3pcs - gears cover
- M6x10 - 1pc - knob
- M3x5 - 4pcs - piston linkages
- 8mm OD aluminum tube, ~52mm length - 3pcs
- Grease
The drive gear must be aligned well before mounting the planetary gearbox. There is alignment mark on the drive gear and the bottom plate. Align those marks while the locking bolts are fully retracted.
Some flexing of the bottom plate is required to get the gears in place.
Comment & Rating (4)
All
This is so cool..Love it!! :)
1
Reply
Where are the handles?
The designer has replied
0
Reply
You have to make them yourself. You need to print knob_end.3mf three times and then cut 8mm OD aluminum tube to 3 equal length pieces. Or you can replace the aluminum tube for 3D printed rod as long as the outer diameter is 8mm.
(Edited)0
Reply
that’s great
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld