Hi MakerWorld! This is our first upload. I hope you all enjoy :) We primarily keep Bambulab and Polymaker filaments in house. You can try filaments from other brands but recommend finding ones with similar transmission distance. I've included those values below.
The .3mf file includes color changes in the Preview tab, feel free to adjust or move around as needed. If you have AMS it will automatically do the color swaps for you :) Otherwise if you do not have an AMS, do not worry as you can still perform the color swaps manually at each pause!
Filaments Used:
Swap Instructions:
Start with Charcoal
At layer #11 (0.96mm) swap to Red
At layer #15 (1.28mm) swap to Orange
At layer #17 (1.44mm) swap to Yellow for the rest.
Dragon Print Settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Classic wall generator
Frame Settings:
back to 0.2mm Layer height
5% Gyroid infil
Classic wall generator