We designed an spinning key chain that you can individualize completely with letters that you want.
The design allows it to make a keychain with literally any name or any letters you want that is working as a fidget toy at the same time.
This could be used e.g. as a present for new parents ato put the baby's name on that keychain.
To make your own individual keychain, you have to follow these steps.
- Open the file and choose the letters that you need and line them up like you want in the keychain. Then delete the rest of the letters.
- Depending on the length of the name, you have a different sized rod.
- there are several different sized rod-parts available to adjust for that.
- You copy as many rod parts as needed and line them up next to the letters to see how many you need (see Screenshot foto nr.3)
- if you have the necessary amount, add the top and bottom part of the keychain
- print all of the parts needed.
After you've printed the parts, you need to glue the rod-parts and the bottom together using normal oder super glue.
Slide the letters on the rod and glue the top part (ring for the keychain).
Now you have a spinning figet toy keychain.
To print it, i used the following setup:
- High temperature PEI Plate so the the rod-parts fit tightly
- no supports needed
- 7 lines of brim so they don't tip over
- Bambu PLA white
- The letters and the parts in the file are already placed/rotated for optimal printing
Have fun :)