The clear look of someone giving it their all, trying to achieve "maximum effort."
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA Ziro Black Transmission Distance: 0.5
- PLA Ziro Dark Gray Transmission Distance: 6.4 | or Overture Cement Gray
- PLA+ Sunlu Gray
- PLA BambuLab Basic Gray
- PLA Ziro Light Gray | or Overture Light Gray
- PLA+ Esun Bone White
- PLA Overture White
Swap Instructions:
- Start with Black
- At layer #7 (0.64mm) swap to Dark Gray
- At layer #9 (0.8mm) swap to Gray
- At layer #13 (1.12mm) swap to Gray
- At layer #16 (1.36mm) swap to Light Gray
- At layer #20 (1.68mm) swap to Bone White
- At layer #22 (1.84mm) swap to White for the rest.
Enjoy my work? Support me by joining my club on printables. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.