A1 mini anti vibration feet
Copyright Claim
A1 mini anti vibration feet
Boost
112
206
93
Print Profile(1)
50 mm/s, 0.2mm layer, 2 walls, 10% infill
Designer
3.6 h
1 plate
Boost
112
206
93
2
451
375
Released
Description
In case of different material and shore grade of TPU, please be safe and use your own cutomized TPU settings.
Anti vibration feets for the A1 mini. Is made from TPU.
In the profiles there a set of 4 feets.
Infill 10 % Gyroid
TPU 95 A
Comment & Rating (93)
All
The print profile is no longer public
Around 56% through it started printing 2mm above the actual print.
(Edited)The designer has replied
0
Reply
Hello disinterest,
just printed that part without any issues. Maybe you have to make some adjustment on your profile or slicing. I'll add another profile which is much slower. You can try this out.
(Edited)
0
Reply
I sliced and printed on my neptune and it worked out, a1 probably struggled with my soft tpu.
0
Reply
Replying to @DonBossco
I can't change the rating higher until I have a successful print and since I reprinted on a different printer that's not going to happen.
0
Reply
The print profile is no longer public
Not the nicest print but it is functional. The used TPU was quite old and not tried before the print. Hence the surface is not perfect. I might repeat with new or dried TPU.
The designer has replied
0
Reply
functionality is more important 😁
0
Reply
The new print is now much nicer (with dry tpu and a 0.6 mm nozzle). I decreased the infill to 5% and used gyroid infill pattern for more flexibility. thanks again for the nice model…
(Edited)
1
Reply
Replying to @edding3001
Yeah looks much better. I thought 5 % is too soft/flexible. Good to know it works!
0
Reply
Print Profile
50 mm/s, 0.2mm layer, 2 walls, 10% infill
Endlich steht der Drucker richtig fest und bewegt sich nicht mehr. Vielen Dank🖖🏼
The designer has replied
2
Reply
Freut mich wenn's funktioniert 👍
0
Reply
First ever print with A85 - great result.
Thank you for the work with profile and model :)
The designer has replied
1
Reply
You're welcome! Im glad you like it
0
Reply
Print Profile
50 mm/s, 0.2mm layer, 2 walls, 10% infill
nice print, they seem a little tall and are difficult to place under the printer though
1
Reply
Print Profile
50 mm/s, 0.2mm layer, 2 walls, 10% infill
Perfect and easy Print. thanks a lot!
1
Reply
Print Profile
50 mm/s, 0.2mm layer, 2 walls, 10% infill
came out great I had no issues thanks!
0
Reply
Print Profile
50 mm/s, 0.2mm layer, 2 walls, 10% infill
printed beautifully and after 2 months of use, still rock solid, or more like great at absorbing the vibes.
0
Reply
Print Profile
50 mm/s, 0.2mm layer, 2 walls, 10% infill
passt alles danke
0
Reply
Print Profile
50 mm/s, 0.2mm layer, 2 walls, 10% infill
Not sure they really do much, but they printed well, fit well (although lining them up under the printer was a bit tricky, some double-sided tape would help) I will keep using them but not convinced they are doing much
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld