"Glowing" - Flowers by Madness3D

Madness3D

Art>2D Art

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

150x150 - 0.08mm layer, 1 walls, 100% infill

Designer

2.6 h

1 plate

5.0(1)

0.08mm layer, 1 walls, 100% infill

2.3 h

1 plate

Boost

Released

Description

Optimized for 3D printing with a amazing depth of field.

The Glowing series is optimized for use with glow in the dark filaments for a mesmerizing effect.

Charge the pictures with UV light for the most optimal effect.

There will be 2 print profiles available.

200x200 is optimized for x1c, p1s, p1p

150x150 is optimized for A1 mini.

Frames for both sizes can be found in my uploaded models.

Pictures can be printed with out AMS by following the print instructions below.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Bambu Lab PLA Matte Charcoal
Bambu Lab PLA Glow Blue
Bambu Lab PLA Glow Green
Bambu Lab PLA Glow Pink
Bambu Lab PLA Glow Orange
Bambu Lab PLA Glow Yellow

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Bambu Lab PLA Glow Blue
At layer #11 (0.96mm) swap to Bambu Lab PLA Glow Green
At layer #14 (1.2mm) swap to Bambu Lab PLA Glow Pink
At layer #17 (1.44mm) swap to Bambu Lab PLA Glow Orange
At layer #19 (1.6mm) swap to Bambu Lab PLA Glow Yellow for the rest.

Art generated with midjourney and optimized for 3D printing with Hueforge.

Comment & Rating (3)

@STLDad6

Print Profile

150x150 - 0.08mm layer, 1 walls, 100% infill

Amazing. I wish it paused automatically. But I got it going. Came out beautifully second print but this time I added all the pauses in the slicer and it obviously came out better.

(Edited)

The designer has replied

@Madness3D

I have considered making print profiles with pause on the correct layers for users that does not have AMS. You can currently do it manually with bambu studio by adding pause on the layer height described in the comments. I am doing this on my newer designs, but I will try to go back to my old uploads and create a print profile with pause added for easier printing without AMS.

(Edited)

@STLDad6

Thank you. believe me I know how to add the pauses, thought they were in there. 🤷🏻‍♂️ I printed it from my Bambu handy app maker world. I might do it again because I missed the lower half getting GITD filament.

No more