Trophy Vince Lombradi NFL by Navibp3d

Navibp3d

Hobby & DIY>Sport & Outdoors

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 5% infill

Designer

14.6 h

5 plates

5.0(4)

0.08mm layer, 2 walls, 15% infill

Designer

36.9 h

5 plates

4.5(2)

Boost

157

197

Released

Description

Vince Lombradi Trophy. THIS IS A MULTI-PART TROPHY, that means it does not require an AMS! The different components are modeled with connecting pins to achieve a press with a bit of CA glue. If you print with a layer height of 0.08 you can hide the top pattern and it will be on the string of the ball. The trophy this its measure is 47cm, which I have never had problems when printing the same as its scale to 50% which is in a measure of 25cm.
PS: A separate board has been created with the connection pins since some users had problems when printing together with part of the ball. The original size of the vince lombardi is 55,8cm, is very cool trophy for any NFL fan. If you like it and print it leave me a like and upload your photo, i´ll be waiting for any questions or improvements for the file, LET´s GO!

New print file due to, found an error the ball lamination, all solved, ENJOY YOUR PRINT!!!!

Comment & Rating (26)

@julian.richter

Print Profile

0.08mm layer, 2 walls, 15% infill

(Edited)

The designer has replied

@Navibp3d

Thanks for the rating!!!

@Element_f_l

Print Profile

0.08mm layer, 2 walls, 15% infill

The designer has replied

@Navibp3d

Thank you for rating

@PrintermanBln

Print Profile

0.2mm layer, 2 walls, 5% infill

The designer has replied

@Navibp3d

My friend, it is SPECTACULAR!!! thank you very much for your comment.

@DDDrake4

Hey, what do I need to scale all of the parts to be if I want to scale this 1:1? I saw in a previous comment that you said that this model is currently scaled at 47cm and not 55.88cm.

The designer has replied

@Navibp3d

I'm working on it, as soon as I have it I'll leave it uploaded to the profile 🥰.

@DDDrake4

Replying to @Navibp3d :

Ok sounds good, thank you! Cant wait!

(Edited)

@makermaniac3d

OMG!!! It's just what I was looking for, I love it

The designer has replied

@Navibp3d

Thank you very much for the comment, I hope you like it 🥰.

@BushLeague

What would you suggest is the best way to edit the text for Fantasy Football trophy purposes? I'm new to 3D Printing and CAD programs, TIA!

The designer has replied

@Navibp3d

I used the add text bamboo studio laminator, I show you photo, and the truth is that it was not bad, I liked it a lot. If you want to try 🥰

@mstoflinsky

Do I need 2 rolls to print this? or A full roll rather?

The designer has replied

@Navibp3d

You can always play with the fill and layer height, I mark 0.08 to make it look as smooth as possible and 15% to give it some weight but at 0.2 and with 5% fill it's not bad, as long as you don't want to throw it like brady did 🥰😂.

@Jaybroonz

It appears that in your new file, the holes between the two base parts are no longer lined up--unless I'm doing something incorrectly.

The designer has replied

@Navibp3d

Friend, I just realized the error, thank you for your comment, the file is already modified, there was a failure with the previous version uploaded, I hope everything is correct, enjoy this print and apologies for the errors!!!

@DanielSantana3D

Good Job 👏👏

The designer has replied

@Navibp3d

thank’s dude

@RyGuyFly87

curious if this is 1:1 scale?

The designer has replied

@Navibp3d

I am preparing the file to scale 1:1, this its measure is 47cm, which I have never had problems when printing the same as its scale to 50% which is in a measure of 25cm. PS: the original size of the vince lombardi is 55,8cm ;) :)