Clicker Fidget Toy
Copyright Claim
Clicker Fidget Toy
Boost
99
142
21
GIF
Print Profile(2)
0.2mm layer, 3 walls, 10% infill
Designer
24 min
1 plate
A1 mini, 0.2mm layer, 3 walls, 10% infill
28 min
1 plate
Boost
99
142
21
3
276
260
Released
Description
Keyboard Switch Fidget Clicker
Simple print for hours of fun ! This clicker lets you add any of your favorite keyboard switches into it to let you click to your hearts content
Only 2 parts to print or use your own keycap for an even quicker print. I've provided both files separately in the raw files so you can download whatever one you want.
Parts:
1x Keyboard Switch of your choosing, this isn't included in the 3D files and you are expected to already have one of these
1x Keycap, either printed using the provided model called ‘Key_Clicker_Cap’ OR an existing keycap you already have
1x Key clicker base, named ‘Key_Clicker_Base’
Comment & Rating (21)
All
Boosted
Print Profile
0.2mm layer, 3 walls, 10% infill
Good print however I would advise to print on a higher quality as the rounded top becomes weird looking if you don't. You also need a little bit of strength to push in the cap to the switch (I used a cherry MX Blue)
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
prints awesome and sounds awesome with the switch I put in I like the model.
The designer has replied
1
Reply
thank you ☺️
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
fun design, worked well
The designer has replied
1
Reply
Thanks glad to hear you like it ! :)
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
very good print quality
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Fun little project, easy print with no drama
1
Reply
I’m confused, is the middle part printed?
The designer has replied
0
Reply
so the only printed parts are the base and the keycap (assuming you don’t use your own keycap)
the mechanism inside comes from a keyboard switch.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
turned out cute
1
Reply
what other part do I need to complete this?
The designer has replied
0
Reply
Just 1 keyboard switch, doesn't matter what one you use
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
very satisfying
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld