Magic Mouse Dock with Desk Mount

(Affixed by hardware screw or double-sided tape (2x bases to choose from))

NOTE: This model is designed to fit the Apple Lightning to USB Type-A charging cable.

A charging dock for the Apple Magic Mouse (lightning port rechargeable). I have designed two bases that are able to be affixed to surfaces either by double sided tape or by 3x 3mm hardware screws. The dock itself has a channel to feed the USB charge cable underneath.

In order to install the cable -
1- Insert the lightning end of the charge cable through the port at the end of the affixable base.
2- Guide the lightning end of the charging cable up through the base (in the correct orientation) and out the top.
3- Orient the lightning end of the charging cable opposite to how it was when inserted in the base.
4- Firmly seat the lighting end of the charging cable in the dock, this is supposed to be a very snug fit.
5- Feed the charging cable through the channel on the underside of the dock and out the front.
6- Slide the dock into the fixed base.

Hardware -
Machine: BambuLab P1S
Plate: Textured PEI Plate
Hot end: 0.4mm hardened steel nozzle.

Settings -
Print Speed: Standard/Normal
Filament: Bambu Labs PLA Matte

Process Settings

Process:

0.20mm Standard - Mostly Default with the below changes -

Strength-
Wall Loops - 4
Detect Thin Walls - Checked
Sparse Infill Density - 24%

Support-
Enable Support - Checked
Type - Normal(auto)

Others-
Brim type - No-brim