I designed this low profile dual LED strip to hold two 10mm FCOB LEDs. They work for any 10mm strip though as shown in the picture with WS2812s as an example. The fit is perfect and they snap in on the side with no need for using the adhesive on them.

I used them in a wooden floating shelf to give some task lighting to my 3d printing area. I just routed a 3/8" groove into the solid wood shelf then super glued the mounting rails in place. Could also be used just about anywhere with command strips.

Full video on the build is on the Fix This Build That YouTube channel if interested.

• Printed in PLA
• 0.2mm layer height
• 10% infill
• sized at 220mm, scale lengthwise as needed to fit your printer bed

(affiliate links)

• FCOB LEDs I used: https://amzn.to/40RPnSq
• LED controller: https://amzn.to/3oQY02e
• Power adapter: https://amzn.to/3oYpPpd