A trophy that looks like a beer mug filled with beer!
You are welcome to change the text on the plaque.
To actually give the illusion of a glass beer mug filled with beer, the mug is printed in transparent filament, and then the beer and foam is printed separately to avoid a ton of filament changes.
The trophy base and beer mug can be printed in one go with just a single filament change, to avoid having to glue them together afterwards. But, to achieve a somewhat decent transparency, Outer Wall Speed for the beer mug itself is slowed down to 30 mm/s. The base is still printed with regular speeds.
No supports are needed!
The beer and foam can also be printed in one go with a single filament change.
The plaque prints separately and can simply be glued to the base with some superglue. On the base, there is a indent, to make aligning the plaque easier.
And as can be seen here, the beer and foam slides nicely into the mug. So, you can also choose to simply not print the beer, if you want the mug to appear empty instead.
Enjoy, and happy printing!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.