I needed a covered/enclosed solution for the poops from my X1C due to cats that have way more curiosity then sense. I also wanted to have them disposed off the side of the bench it sits on, in some kind of waste basket. So using some idea's from others, an exhaust adapter for a Dryer Vent, and a 5 Gallon bucket created the 3 pieces shown. I found that a vertical 50mm x 50mm slide opening was needed or the poops would hang up at top of slide. The elbow converts that 50x50 to a 98mm diameter “pipe” that can stick in the female end of the Dryer Vent pipe. I used 3mm n48 neo magnets from apex magnets for the connections part to part, and to stick the cover and slide to the back of the machine.