Toothpaste Tube Squeezer by julienk0

julienk0

Household>Other House Models

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

without Support! 0.2mm layer, 2 walls, 15% infill

Designer

25 min

1 plate

4.7(55)

with Support! 0.2mm layer, 2 walls, 15% infill

Designer

55 min

1 plate

4.8(5)

Colgate Squeezer 65mm A3D PETG - PLA Sup

51 min

1 plate

3.5(2)

Skincare tube squeezer 85mm A3D PETG - PLA Sup

1.2 h

1 plate

Click to see more

Boost

113

276

398

Released

Description

Tight toothpaste squeezer.
Designed for one-hand operation.

Tip: When threading the toothpaste tube, first insert a corner and pull the squeezer open slightly diagonally. It's very tight, but you can get everything out of it ;)

For a nice surface, I recommend the print profile with supports, but you need PETG as an interface filament.

Comment & Rating (69)

@pixelated

Boosted

Works very well. Just what I was looking for. Bambu Handy would not let me print your print profile on my A1 Mini though. I went ahead and uploaded an A1 Mini compatible profile using the .2mm nozzle as that's what I had installed. Any points it earns are allocated to you. Thanks!

@pixelated

Boosted

Forgot to mention; the bronze version is printed with a .2mm nozzle, the white one used a .4mm nozzle.

@bukenya

Print Profile

without Support! 0.2mm layer, 2 walls, 15% infill

simple part but the gap is too narrow to insert the toothpast tube. It´s cutting into the tube itself instead of squeezing it.

@xiangyucao

Print Profile

without Support! 0.2mm layer, 2 walls, 15% infill

at first I thought the line is too thin, but after I get it in, it's just right!

@CherrysC

Print Profile

without Support! 0.2mm layer, 2 walls, 15% infill

nice details

@Gentleman

Print Profile

without Support! 0.2mm layer, 2 walls, 15% infill

easy und schnell zu drucken, funktioniert auch prima.

@thingspatprinte

Print Profile

without Support! 0.2mm layer, 2 walls, 15% infill

printed well and very functional. tight fit to get all the toothpaste

@RockieOnly1

Print Profile

without Support! 0.2mm layer, 2 walls, 15% infill

there was some drooping on the overhanging section that needed a bunch of cleanup. it could use a bit of support if you don’t want to see that. otherwise it printed great.

(Edited)

@wplumia.rt

Print Profile

without Support! 0.2mm layer, 2 walls, 15% infill

@TEACCHDoGG

Print Profile

without Support! 0.2mm layer, 2 walls, 15% infill

I think, the brim is not needed. or only outer brim? Update: thanks for fast reaction :)

(Edited)

The designer has replied

@julienk0

Thank you for your feedback. I took this into account and adjusted the profile accordingly. I would be very happy if you would adapt the rating to my print profile.

(Edited)