"More Espresso, Less Depresso" Office desk mug holder by make 3D

make 3D

Household>Office

GIF

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

V1.1 (For 10mm to 30mm tapletops)

Designer

4.9 h

2 plates

4.9(11)

"More Espresso Less Depresso" Mug holder

Designer

4.9 h

2 plates

4.7(18)

"Drink Responsibly" Mug holder

Designer

5.2 h

2 plates

5.0(1)

Blank (No Text) 0.2mm

Designer

4.6 h

2 plates

5.0(1)

Click to see more

Boost

301

497

290

353

Released

Description

- Coffee mug/drink can holder -

I was tired of always having to be carefull to not spill my office, as I don't have much room on my desk.

Therefore I designed this mug/can holder so I can keep my drinks safe!

This is a fully 3D printed mug/can holder for most desk thicknesses. No Magnets, no bolts, no glue and no screws are needed. Just 3D printed parts.

I designed the holder so it can be printed without any support material. This way there should be no sides with lower quality finish. Resulting in a very nice print.

If you don't have a AMS unit, the main body can be printed in on solid color and the screw an any other.

The holder is designed to hold the most common size coffee mugs, drinking glasses and beverage cans.

(Not tested with slim cans like Red Bull)

The maximum diameter of a coffee mug is approximately 85 mm
(The holder has a cutout for mugs with handles.)
The maximum diameter of regular can is approximately 66 mm
The holder fits any tabletop thickness between 15mm and 30 mm

Assembly is pretty straight forward.

The two large parts are joined with a 90 degree twist lock. Please be aware that the twist lock might seem tight if your printer is not well calibrated or if you are using low quality filament with poor tolerances.

Please have a look at the short video showing how to assembly if you are in doubt.

I have made two versions with different qoutes on top:

“More Espresso Less Depresso” and “Drink Responsibly”
If you do not want any text on top, simply re-color the part within Bambu Studio to be one solid color.

My holders are printed with these filaments:

Bambu Lab PLA Matte Ivory

Sunlu PLA+ Black

Bambu Lab PLA Basic Orange

Bambu Lab PLA Basic Bambu Green

Bambu Lab PLA Matte Yellow

Licensing

All my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.

For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.

How to Support Me

If you like my designs, please give them a ‘like’ as this helps the model being more visible to other users.

Also please consider donating via https://www.buymeacoffee.com/make3d
All support is highly appreciated!

Updated 17-01-2024: Added Print Profile V1.1
Increased the span of the opening to allow tapletops down to 10mm thickness.

Comment & Rating (60)

@Miclongman

printed perfect but unfortunately I don’t have a desk that thin to fit it but I’m gonna give it to a good friend of mine :) love these and hope to se more with different things on them :)

The designer has replied

@make3D

Replying to @make3D :

I have added a print profile with a larger screw. This allow the tapletop to be down to 10mm thickness. I hope this helps. You can just print the screw as it will with the original thread as well :)

(Edited)

@make3D

Replying to @make3D :

Wait I misunderstood. What is the thickness of your tabletop? :)

@Miclongman

Replying to @make3D :

1 1/2 inch desk and my mug is about 4 iches wide lol

@meCoreyG

Print Profile

V1.1 (For 10mm to 30mm tapletops)

love this so much.. I printed it for my buddies. might print a bumper in TPU to protect the desk/table. GREAT JOB!

The designer has replied

@make3D

Thanks! They look great! i was also thinking of adding TPU bumper/pad but I thought most people don't use TPU filaments - so i decided not to add it :)

(Edited)

@meCoreyG

well if you do, let me know I will print it.

@meCoreyG

Replying to @make3D :

Need some wall art with this logo on it

@barbasnoo

Print Profile

"More Espresso Less Depresso" Mug holder

nice!

The designer has replied

@make3D

Nice print, and thanks for the A1mini profile!

@hahacky

Love it, thank you! I have two tables about 4 cm thick, any chance of a "thicker" one?

The designer has replied

@make3D

Sure thing! I'll have a look at it later today. Will keep you posted! Thanks for printing this one.

@hahacky

Print Profile

V1.1 (For 10mm to 30mm tapletops)

Love this simple but effective print! would be nice if it could accommodate thicker slabs.

(Edited)

@BrainfishCreati

Print Profile

"More Espresso Less Depresso" Mug holder

worked well

@min.nim

Print Profile

V1.1 (For 10mm to 30mm tapletops)

nice looking but don’t over tighten it or it will break

@user_1723110605

Print Profile

"More Espresso Less Depresso" Mug holder

Really like this design. not had any issues printing...Thanks! PLA color combo is prusament - gentlemens grey main, and text and screw was bambulabs matte - desert tan

@Bytome

Print Profile

"More Espresso Less Depresso" Mug holder

tuve que editar el modelo para mi mesa de 4cm

@BamBamDesign

Print Profile

V1.1 (For 10mm to 30mm tapletops)

I don't know why it's placed near the edge from the buildplate. First big fail! Second applaid more glue on the edge, turned really nice. Love it! Thank you😉👍

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.