These parts make it possible to replace the battery retainer on the Team Associated RC 10 B6 (.1 - .2 - .3) with a part that allows a firmer fit. There are two side panels that hold the battery leterally and an upper battery clamp that can accommodate a tie rod at the top, like the original Associated part. The difference is that the lower feet of this part are removable, as they are fixed with 4 M3 screws. All parts allow the battery to be moved back and forth.
I recommend using filled PLA or ABS. Green is a beautiful colour!
Advice on how to improve the design of the part is always welcome!
Isi Serrati
PSG Italy
yellowkid@fastwebnet.it