StarWars deathstar lithophane lamp by Olivier3dPrint

Olivier3dPrint

Household>Decor

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 100% infill

Designer

23.1 h

1 plate

4.6(36)

Faster print, 0.28mm layer, 2 walls, 15% infill

16.5 h

1 plate

4.9(18)

Boost

555

889

1.2 k

320

Released

Description

A deatshstar lamp from the starwars saga

Stand can be found here : https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files or https://makerworld.com/fr/models/25223#profileId-21974

You can buy me a Tea (i do not like coffee ;) ) here https://ko-fi.com/olivier3dprint

If you want using the BambuLab Led Kit 001, i made on for this

star wars

lamp

Comment & Rating (84)

@BillyBob

turned out great!

@Boanderswood1

what light socket fits the bottom connection?

@BillyBob

I just found a cheap one on Amazon and just mod it to fit the one I bought. REXTiN 2 pcs E26/E27 LED Light Socket 5.9FT Extension Cord with On/Off Switch and US AC Power Plug Bulb Socket for Pendant Lighting Bulb Lamp in Kitchen Bedroom Restaurant (2 Packs) https://a.co/d/0iVbOPh

@BillyBob

Replying to @Boanderswood1 :

https://makerworld.com/en/models/412412 I uploaded the model if that is helpful.

@BushySushiPanda

Excellent model and looks great when lighted.

The designer has replied

@Olivier3dPrint

Thanks

@bhfield

Looks awesome! What filament and color did you use?

@BushySushiPanda

Replying to @bhfield :

This was Overture PLA white.

@straight606

Print Profile

Faster print, 0.28mm layer, 2 walls, 15% infill

I cut this in half and am using it as a light diffuser for our living room! turned out awesome!

@.s_.

this is awesome. can you share the print profile

@straight606

Replying to @.s_. :

I used the print profile from the original uploader. all I did was measure my light diameter, cut the model in half then scaled it to the size I needed for my light. I didn’t change any settings. then I used some double sided 3m tape to secure it to my light!

@MikeBacin

Print Profile

0.2mm layer, 2 walls, 100% infill

Amazing results, printed with Polymaker PLA Steel Grey (Hex Code: #616469)

@2Goodwins

I think this is the coolest one I've seen.

@Boanderswood1

great print. one question. is the base a connector for a certain light type or the stand? for some reason I can’t get to the stand from your links.

The designer has replied

@Olivier3dPrint

the base connector is the same that "Designer lithophane moon lamp" can be found on Printables

@PeterHall

Print Profile

0.2mm layer, 2 walls, 100% infill

Very happy with this! printed in Bambu Lab Matte Ivory White. Next - a stand for it! :)

@joeturczak

Print Profile

0.2mm layer, 2 walls, 100% infill

Came out really nice. For a normal lamp like the IKEA one that hangs from the curling you need to use the 28mm adapter. You will also need to use tubular bulbs, as a regular one will not fit in the hole. Overal,l nice model. I wish it had an indentation where the weapon is but that's ok still looks great.