This download DOES NOT include the Main Assembly. It only contains 2 Accessories to be used with the Main Assembly that can be found at here. I got to separate this to avoid needing the NSFW label on the Main Assembly as Attachments are optional.

https://makerworld.com/en/models/90112

Introduction

The Annoying Scissor - Party Favor Toy With Customizable Attachments are cute little toys you can print for your next party. These scissor punch toys work perfectly as cute little party favors.

The design of these toys is of a spring like mechanism that connects a pair of scissors to a small attachment that you can swap freely.

Print some as party favors for your next party or even use them in some sort of punching-themed party game.

PLEASE DO NOT aim at the eye while using this. It can be dangerous and i will not be responsible for any injury. Please only use it with an adult supervision if a kid is going to play with it.

The Annoying Scissor Highlights:

• Included 5 Different attachment you can use (Punch, Stop, Sword, Middle Finger, Pen#s)
• Customizable the length yourself it extends to easily by simply printing more Connectors and Joint Pieces (Default is 8 Joint Pieces)
• Mix and Match your colors
• Great as a party favors
• Even better to annoy someone or simply use them for sword fights in party.
• Have also included a DIY connector (STL Raw File) that you can use to incorporate into anything you like and replace the front piece. You can easily use free vectorization tools online to turn an photo into a 3D SVG and join up with this DIY Connector. (Some CAD skills needed) Go Wild!

Change Attachments Guide

What Mod / Fixes / Enhancement do i offer?

Please don't download the wrong one. Only those in the photos below is designed by me who painstakingly took a lot of time to measure carefully and design just to get it working. #SupportOriginal Love you guys for all the support so far!

- AMS FIX Failed To Retract Filament Error (a preventive measure and solve the bay 2 and 3 error and prevent bay 1 and 4 to have any possibility of having an error due to tension and friction) (Updated design on the 2nd photo below, try 1 then if it doesn't works properly for you then install the other one.)

(BRAND NEW) AMS Filament Pull Back Fix V2 Upgraded - Completely New Design Upgrade For AMS Filament Pull Back ERROR! Precisely Measured

- AMS Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external PTFE tube and allow the most smooth, least friction angle to go into the AMS buffer thus reducing the possibility of an error popping up)

- V2 AMS Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external PTFE tube and allow the most smooth, least friction angle to go into the AMS buffer thus reducing the possibility of an error popping up)

- AMS Fix - Stack the AMS on tp (Using a carefully measured holder to hold the PTFE in a curved angle that will allow filament to go through with the least possible amount of friction when the AMS is stacked on tp of the printer)

- AMS Buffer PTFE Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the PTFE tube exit the AMS buffer to move into the printer extruder.

- V2 AMS Buffer Right PTFE Guide Mount - The Fix For Failed To Pull Back Filament a newly improved fix designed to replaced the V1 This will correct and maintain a nearly 100% straight line when the PTFE tube exit the AMS buffer to move into the printer extruder. Easy Installation. No screws needed!

- Extruder AMS Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the PTFE tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.

- V2 Extruder AMS Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the PTFE tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.

- The Smooth 4 Way Splitter. Look No Further. Combined with AMS Hub Lite together with this small attachment, you will have the Smooth 4 Way Splitter.