Photo is a render printing the actual print now

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #5 (0.56mm) swap to BambuLab Green
At layer #8 (0.8mm) swap to Yellow
At layer #20 (1.76mm) swap to Jade White for the rest.