IMPORTANT INFORMATION PLEASE READ:

This is a large print, split into 12 200mm x 191mm panels. The total dimension once put together is approximately 800mm x 600mm. This took a total of about 55 hours to print, with each panel between 4 - 6 hours of print time.

Due to Makerworld's upload size limitations, I am unable to upload ALL the files to the Makerworld site, however I am providing the links to Google drive folders with everything you need to print this map. Therefore, included in this Makerworld profile is ONLY the STL and 3MF file for Panel 1 (out of 12).

3MF file for the WHOLE map (900MB):
For the 3MF of the entire map, with ALL parts loaded onto 12 plates in Bambu Studio, with all colour swaps loaded and ready to go, please download the .3MF file from this link: https://drive.google.com/file/d/10SGchus6HKDsnLRIhwbI7rT6xkVWlqch/view?usp=sharing

Individual STLs and images for each panel (1.2GB):

I have also zipped up all the STLS for each individual panel, as well as the individual images that I used in Hueforge. This will allow you to customise the print if you do not want to use the 3MF file that I prepared. You can find this zip file here: https://drive.google.com/file/d/1ponoJYHXaPmf6WKvkqPaCpO1E_e5sN3O/view?usp=sharing

Filament swap instructions:

ALL 12 panels will be using the exact same filament swaps. This is so that the colours, hues and blending stay the same when you eventually put the print together and look like one cohesive print, and not 12 individual panels.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

- PLA Overture Black Matte Transmission Distance: 3
- PLA+ Sunlu Coffee Transmission Distance: 3
- PLA BambuLab Basic Beige Transmission Distance: 8
- PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
- Start with Black Matte
- At layer #9 (0.8mm) swap to Coffee
- At layer #13 (1.12mm) swap to Beige
- At layer #19 (1.6mm) swap to White for the rest.

If you have any questions at all, please feel free to let me know! Appreciate your thoughts and comments :)